|
"...Extend our thanks to the Team at Omnicon for the outstanding analysis and final report, which was delivered ahead of schedule! We look forward to working with Omnicon in the future..."
GH-Smiths Aerospace
Mechanical Systems - Aerial Refueling
"I would just like to take this
opportunity to thank you for the support you have provided...over
the last several years. Using your Engineering Services has allowed
us to maintain a high level of quality with our limited internal
staff. Your support...is much appreciated. The Parts Engineering
work has set the standards for documentation, and the methods
that we will continue to use in the future. Your staff provided
us with a pleasant work experience and professional results...We
hope to continue this relationship in the future."
R.B., Principal Electrical Engineer, Electro-Optical
Systems
Goodrich Corporation
"...It has been a pleasure working
with all of you...and we have appreciated your support. We're
looking forward working with you again in 2003"
D.D., Manager, Product Reliability
Honeywell Aerospace Electronic Systems
"...The professionals at Omnicon
play no small part in our mission. Your invaluable assistance
in developing software ... helps us reach the widest possible
audience ...We're glad your on our team"
C.B., Technical Director
Acoustiguide Corporation
"...The knowledge, advice, and confidence
which I gained from our personal interactions were in use throughout
our S-92A Safety Certification process, and remain in place for
the future. ...Thanks again for all the professional help."
B.N., Reliability/Maintainability Engineering Manager
Sikorsky Aircraft
"... Your team displayed the usual
level of professionalism and the results were precisely what
was required.. We here at Ericsson have used a number of your
engineering services and have been nothing less than pleased
with your response to our needs....your customers value your
services.
S. A. S., Vice President
Ericsson Amplifier Technologies
Inc.
"...thanks for your support in our
recent successful maintainability demonstration and preparation
of related data items. The Omnicon team should take great pride
in helping Litton ATD achieve this very important milestone.
Our customer stated that of the sixteen maintainability demonstrations
performed on the IDF program, ours was 'the best one.' Thank
you again for a job well done."
S.M., President
Litton Systems
Applied Technology Division
"Your staff has provided an almost
seamless fit within our organization...If there is anything more
important than having the necessary technical credentials and
being able to work well with the client, it is ...integrity that
can be relied upon and respected. The client wants to feel confident
that the consultant is truly acting in his behalf ...acting in
a manner which is totally honest in all his dealings with you.
In our opinion, it is in this regard that Omnicon excels. Your
integrity is without question and your client appreciates this
enormously."
J.C., Director, Quality and Product Assurance &
E.P., Director, Engineering
AIL Systems
"Omnicon has worked hand in hand
with (us)...as though you and your people wore Parker employee
badges...(we) are very pleased with the quality of Omnicon's
work and the high level of professionalism and cooperation you
exhibit...Your ability to help us resolve a difficult situation...(is)
very appreciated... We consider Omnicon an industry leader in
reliability, maintainability and safety engineering."
W.K., Director, Fuel Systems
Parker Hannifin Corporation
Parker Aerospace Group
"Your contributions at customer meetings
were invaluable and certainly helped clarify several major concerns
on their part. I felt that, as a result of our visit, we have
a customer who is totally in sync with where we are going. In
short, mission accomplished!...Congratulations to the entire
Omnicon team for the support they have given us over the past
five years. Their responsiveness to critical delivery requirements
and the high quality of their reliability and test analyses have
been nothing short of outstanding...It has always been a pleasure
working with you and your great team."
R.J., Program Manager
Litton Systems
Applied Technology Division
"Your work in managing the parts analysis
and ordering process for the numerous electrical components comprising
the Earth Sensor we developed for the GPS Block IIF satellite
was of the highest caliber...My hat is off to you and The Omnicon
Group for a job well done and for being an integral part of the
EDO / Barnes Engineering team. We look forward to a continued
relationship with Omnicon to follow-up on additional parts /
cost savings initiatives."
J.M., General Manager
EDO Corporation
Barnes Engineering Division
"The Omnicon Group fit the bill
exactly. Not only did CSC attain a thorough analysis, delivered
on-schedule, that satisfied our Joint Services customers, but,
at no additional cost, system availability was significantly
increased...Your active participation in joint working groups
and subsequent formal presentations, on behalf of CSC, resulted
in sessions that were highly successful, extremely informative
and beneficial, and well received by our customers...We are confident
that any future tasks your organization performs will continue
to be executed with the highest degree of technical excellence...I
look forward to our continued association in future endeavors."
D.M., Director of Integrated Logistics Support
Computer Sciences Corporation
Integrated Systems Division
CALS Imaging Center
"It is obvious that your people
thrive on difficult challenges...Clearly, the Omnicon team's
knowledge and dedication, under extremely demanding circumstances,
was a key factor in our ultimately winning the contract. In fact,
we regard the proposal as one of the finest we have ever submitted
to the government. Though I expressed my gratitude to your team
at our victory dinner, I wanted to take this opportunity to formally
offer my congratulations for a job well done by The Omnicon Group."
R.A., General Manager
Northrop Grumman
Electronic Sensors & Systems Division
Norden Systems
"Your team wasted no time...They
worked diligently and enthusiastically, with the result being
a project that was delivered six weeks prior to its original
deadline. In addition, the work was approved the first time and
our customer, the Air Force, was completely satisfied."
H.G., Test Engineering Manager
Lockheed Martin Fairchild Systems
"I wish to express my sincere thanks
for your timely and professional support in preparing the reliability
prediction report...The Omnicon Group not only met the required
delivery schedule, but accelerated delivery by almost three weeks.
The 'can do' attitude of your personnel was instrumental in this
achievement. Again, thank you for your excellent contribution.
We look forward to a continued relationship with The Omnicon
Group."
G.W.M, Vice President, Domestic Program Management
Litton Systems
Applied Technology Division
"When your staff joined the program,
they immediately became both productive and valuable assets...The
personnel you provided had significantly greater capability than
we expected and were able to assume more responsibility as the
program progressed...your staff's unique and innovative approach
to a particularly difficult problem resulted in a large cost
savings and major schedule acceleration. I hope to expand your
involvement on future programs as they emerge."
M.J., Program Director, F-14/A-6 Programs
Northrop Grumman
Electronics & Systems Integration Division
Combat Support Systems
"For more than a decade, you have provided
supplemental capabilities for AIL on many programs and proposals,
resulting in significant value added. Your special contribution
has been in developing new and innovative solutions to problems
in the areas of reliability, maintainability, testability, test
program sets, and systems."
T.C., B-1B Integrated Logistics Support Manager
AIL Systems
"When we required a number of highly-skilled
technical people on very short notice to assist us in achieving
our development schedule for new software, Omnicon was there
at precisely the right time with the right people. Bottom line,
Omnicon delivered quality results as promised."
K.P., Software Engineering Manager
Litton Systems
Applied Technology Division
"Whether functioning as an internal
department or providing valuable backup for our staff, Omnicon
has always given us a high level of expertise on an on-demand
basis. Your on-target help during proposals and meeting schedule
deadlines has been greatly appreciated, especially in the areas
of reliability, maintainability, availability and safety."
N.L., Senior Director of Government Programs
California Microwave
Satellite Transmission Systems
"I don't know of another company
like yours that could so effectively hit the ground running on
software development and engineering management assignments...the
high level of software expertise demonstrated by your staff and
Omnicon's short-term service as manager of our Electrical Engineering
Department were instrumental in helping us reach a number of
critical program milestones."
S.S., Director of Program Management
Cubic Corporation
Toll Systems Division
"The measure of a good support team
is how well it performs under pressure, and Omnicon's staff of
professionals has consistently exceeded our expectations on this
score. During the many years that Omnicon has supported our military
and FAA programs, it has delivered superior results, whether
performing ILS tasks or conducting red team reviews."
R.K., Integrated Logistics Support Manager
Westinghouse Electronic Corporation
Norden Systems
"The meeting with our customer was
a 'Do or Die' confrontation. The lack of opportunity to present
an adequate reliability, maintainability, safety and human factors
presentation caused serious concern about Morrison Knudsen's
ability to meet the contract requirements. The meetings were
very influential in restoring hope in the hearts and minds of
our customer. The strong presentation by Omnicon was a major
element in this image improvement effort...thank you for your
excellent support."
E.T., Manager of Engineering Projects
Morrison Knudsen Corporation
Rail Systems Group
|
